Heavy Engineering Rolling Mill Parts Casting Foundry
TDC Alloys is an ISO 9001:2015 certified Rolling Mill Parts Casting Manufacturer in Ahmedabad, providing certified cast parts engineered to withstand extreme shock loads and continuous rolling pressure across steel plants in Ahmedabad.
Our foundry pours heavy rolling mill castings from 10 kg up to 3,000 kg per piece. Using medium-frequency induction melting and 28-element optical spectrometry, we cast mill stand housings, bearing roll chocks, mill drive pinions, wobbler couplings, and flying shear bodies throughout Ahmedabad.
Rolling Mill Parts Casting Manufacturer Showcase
TDC Alloys Foundry
Roughing Stand Casting
Heavy Roll Chock Casting
Flying Shear Housing Casting
Rolling Mill Metallurgy & Alloy Standards
As a specialized Rolling Mill Parts Casting Manufacturer in Ahmedabad, TDC Alloys pours certified fatigue-resistant, high-impact, and wear-resistant alloys:
Adamite & Alloy Cast Steels (Cr-Ni-Mo Formulations)
Optimum combination of high tensile strength and moderate hardness (40 - 55 HRC) for roughing rolls, intermediate stands, mill pinions, and roll chocks.
High-Chromium White Cast Irons (ASTM A532 Class III 18% to 27% Cr)
Dense chromium carbide microstructure yielding 58 to 65 HRC for extreme abrasive wear resistance in wire rod finishing guides, mill aprons, and wear liners.
High-Strength Cast Steels (ASTM A148 Gr. 90-60, 105-85 & 130-115)
Superior fracture toughness and cyclic fatigue resistance under severe mill reversing shocks for mill stand housings, drive spindles, and wobblers.
Spheroidal Graphite (SG) Pearlitic Irons (EN-GJS-700-2 / 800-2)
High thermal fatigue endurance and vibration damping for structural section mill rolls, bearing chocks, and mill coupling boxes.
Mechanical Properties & Material Performance
Our programmable solution heat treatment, stress-relieving, and normalizing cycles optimize metallurgical properties for heavy mill duty:
| Grade / Standard | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Hardness (HB / HRC) | Primary Rolling Mill Application |
|---|---|---|---|---|---|
| Adamite Alloy Cast Steel (Cr-Ni-Mo) | 650 - 850 | ≥ 420 | ≥ 3% | 42 - 54 HRC (380 - 480 HB) | Roughing & Intermediate Mill Rolls, Heavy Mill Pinions |
| High-Chromium Iron (ASTM A532 Cl. III 27% Cr) | 620 - 780 | - | < 0.8% | 58 - 65 HRC | Wire Rod Guide Rollers, Mill Apron Wear Plates |
| Heavy Cast Alloy Steel (ASTM A148 Gr. 105-85) | 725 - 900 | ≥ 585 | ≥ 14% | 220 - 280 HB | Mill Stand Housings, Roll Chocks & Drive Spindles |
| SG Pearlitic Iron (EN-GJS-700-2) | 700 - 850 | ≥ 440 | ≥ 2% | 240 - 300 HB | Section Mill Rolls, Bearing Chocks & Coupling Boxes |
| Ni-Hard Cast Iron (Class IV - 9% Cr, 5% Ni) | 480 - 600 | - | < 0.5% | 56 - 62 HRC | Scale Breaker Rolls, Slag Runout Liners & Guide Shoes |
| Austenitic Manganese (ASTM A128 Gr. B2 / E1) | 750 - 950 | ≥ 390 | ≥ 22% | 200 - 240 HB (Work-hardens to 560 HB) | Scrap Chopper Blades, Cold Shear Knives & Entry Funnels |
Rolling Mill Applications Across Ahmedabad
Major TMT bar plants, wire rod mills, structural section mills, and hot strip producers across Ahmedabad rely on TDC Alloys for dependable performance:
Quality Assurance, Testing & MTC Certification
Every Rolling Mill Parts Casting Manufacturer in Ahmedabad manufactured by TDC Alloys undergoes meticulous non-destructive and destructive examination:
Pre-Pour Spectrometry Testing
Direct-reading optical emission spectrometer verifies 28+ chemical elements per heat to guarantee exact alloy compounding.
Computerized Stress-Relief Heat Treatment
Calibrated normalizing, quenching, and tempering eliminate internal casting stresses and ensure microstructural homogeneity.
100% NDT Testing Facilities
Ultrasonic Testing (UT per ASTM A609), Magnetic Particle Inspection (MPI per ASTM A275), and Liquid Dye Penetrant examination.
EN 10204 3.1 & 3.2 Certification
Full material test reports with mechanical, chemical, heat treatment charts, working surface hardness, and third-party inspection.
Why Choose TDC Alloys for Rolling Mill Parts Casting Manufacturer in Ahmedabad?
Leading rolling mill operators, OEMs, and plant revamping contractors across Ahmedabad partner with TDC Alloys for our metallurgical expertise and reliability:
Frequently Asked Questions
1. What rolling mill equipment parts and castings does TDC Alloys manufacture?
We manufacture components for roughing and finishing mill stands (housings, roll chocks), mill rolls (Adamite, SG iron), drive assemblies (pinions, wobblers, universal spindles), entry/delivery guides, flying shear blades, and cooling bed transfer rakes.
2. What single-piece casting weight capacity does TDC Alloys offer for rolling mill parts?
We produce single-piece rolling mill castings from 10 kg up to 3,000 kg, accommodating everything from small entry guide rollers to heavy roughing mill stand chocks and pinion blanks.
3. How does TDC Alloys ensure rolling mill chocks and housings resist extreme cyclic shock loads?
Our rolling mill chocks and housings are poured in high-strength ASTM A148 alloy steels and high-grade SG irons, followed by computer-controlled normalizing and stress-relieving heat treatments and 100% Ultrasonic Testing (UT) to ensure zero internal shrinkage.
4. Are TDC Alloys rolling mill replacement spares compatible with OEM bar and section mills in Ahmedabad?
Yes. All spare parts are precision CNC machined to exact OEM tolerances, fully compatible with Morgan, Danieli, Primetals, SMS group, and domestic Indian rolling mill equipment for seamless field installation.
5. What quality testing documentation accompanies rolling mill parts shipments to Ahmedabad?
Every shipment includes comprehensive EN 10204 3.1 Material Test Certificates (MTC) detailing 28-element chemical spectrometry, tensile/yield properties, hardness profiles across working surfaces, heat treatment charts, and NDT inspection reports.
Request a Rolling Mill Parts Casting Quote for Ahmedabad
Submit your drawings, material specifications, and batch quantities for prompt technical review and direct foundry pricing.